Pivovarnické stroje
Nastavit hlídacího psaNalezeno celkem 11 inzerátů

vyvíječ páry
100 000 Kč
Prodám elektrický vyvíječ páry o výkonu 150kg páry/hod. Odběr v plném výkonu 100Kwh, možnost zapnutí na 4 výkony. 4 x 25Kwh . Komplet zařízení i s úpravnou vody. Stále v provozu a celou dobu bez závad. Důvod prodeje je kompletní změna technologie firmy. Možné převzetí ihned.

Minipivovar kompletní nepoužitý (ohřev párou)
1 080 000 Kč
Prodám kompletní minipivovar - nový, nepoužitý. Dvounádobová technologie, ohřev párou. Pivovar je kompletní:
Č. položky Položka Množství
1 100 kg/h mlýn na slad 1
2 2BBL rmutovací/ scezovací káď (pára) 1
2BBL varná káď/ vířivka (pára)
Čerpadlo na mladinu, výměník tepla, potrubí, filtr, zásobník, ovládací panel PLC atd.
3 4BBL nádrž na horkou vodu a čerpadlo 1
4 4BBL fermentor - CK tanky 4
4BBL přetlačný tank 1
5 3HP chladič + 4BBL nádrž na studenou vodu a čerpadlo 1
6 50L CIP systém 1
7 Nástěnný ovládací panel PID 1
8 50KG/h elektrický parní generátor s zařízením na změkčování vody 1
9 Potrubí a spojovací a další materiál k sestavení
V případě zájmu mě kontaktujte.
Zdravím, Šimerka
Č. položky Položka Množství
1 100 kg/h mlýn na slad 1
2 2BBL rmutovací/ scezovací káď (pára) 1
2BBL varná káď/ vířivka (pára)
Čerpadlo na mladinu, výměník tepla, potrubí, filtr, zásobník, ovládací panel PLC atd.
3 4BBL nádrž na horkou vodu a čerpadlo 1
4 4BBL fermentor - CK tanky 4
4BBL přetlačný tank 1
5 3HP chladič + 4BBL nádrž na studenou vodu a čerpadlo 1
6 50L CIP systém 1
7 Nástěnný ovládací panel PID 1
8 50KG/h elektrický parní generátor s zařízením na změkčování vody 1
9 Potrubí a spojovací a další materiál k sestavení
V případě zájmu mě kontaktujte.
Zdravím, Šimerka


Tanky na pivo
Dohodou
Tanky na pivo,250,500,1000l.Chlazene s izolací.Nebo jen jeden plast.Volejte co potřebujete.Co je na foto je skladem.Jsem plátce DPH.
Výčepní zařízení přenosné vodní dvoukohoutové. Počet chlazených nápojů-2. Výkon 160 l/hod. - 6 piv/min, ledová banka 25kg. Rozměry (š,h,v) 38x38x70cm. Nápojová hadice 6,7x9,5mm x 4m. Váha 42kg. Záruka 1 rok. Toto zařízení je kompletně repasované v chladírenském servise
4 okruhy dochlazování, čeřidlo s pumpou, zásoba ledu cca 40kg dle nastavení termostatu. Výkon 140 l/hod. Rozměry (š,h,v) 43x43x75,5 cm. Váha cca 48 kg. Toto zařízení je kompletně repasované v chladírenském servise. Záruka 1 rok.

Výčepní dno sudu s 6 kohouty
5 000 Kč
Prodám výčepní dno sudu s 6 kohouty. Průměr 60cm, výška 15cm

Varna pivovaru 500 l
450 000 Kč
Prodám pivovarskou varnu o objemu 500 litrů. Ohřev elektrický, regulovatelný, jednotlivé kroky programovatelné pomocí rozvaděče. Dvě nádrže 250l na ohřev vyslazovací vody. Čerpadlo, 2x motor (míchadlo i kopačka), chladič. Možnost prohlédnutí (nyní v rozebraném stavu) v Horních Bojanovicích po telefonické domluvě.

Nabízíme dovoz pivovarského zařízení dle vašich požadavků, nebo i kompletního minipivovaru dle vašich představ. Poptejte, probereme nejvýhodnější variantu i s možným náhledem kvality přímo u nás.

Mikropivovar pro výrobu 100-140 litrů piva denně
1 345 867 Kč
Three-units brewhouse for 300 liters — model: BHW-300
In our standard base kit we offer two and three-unit brewhouses.
The two-units brewhouse contains:
Mash-wort kettle;
Lauter tun;
Piping and pump(s);
Remote control for two units;
The three-units brewhouse also contains a whirlpool and a control panel for three units.
The rest of the units, such as a mash-kettle, hot and cold water tanks, we offer as additional equipment at the client's choice.
Cost of equipment:
Base equipment
Roller malt mill 150 kg/h RM-150 1 pcs.
CCT at 300 liters CCT-300 7 pcs.
Plate sanitary wort chiller for wort cooling HE-300 HE-300 1 pcs.
CIP-station for tanks up to 600 liters and beer kegs CIP60(2)K 1 pcs.
Beer Glycol Chiller for Fermentation Tanks Cooling CH-6 1 pcs.
Three-units brewhouse for 300 liters BHW-300 1 pcs.
Cost of base equipment: 45730,00 €
Additional equipment
Hot water tank at 600 liters HWT-600 1 pcs.
Cold water tank at 600 liters CWT-600 1 pcs.
Cost of additional eqiupment: 6950,00 €
Cost of complete set: 52680,00 €
Electricity consumers:
Roller malt mill – 1.5 kWt
CIP-station – 3.8 kWt
Beer Glycol Chiller – 3 kWt
Three-units brewhouse – 25 kWt
Hot water tank – 5 kWt
A feature of our breweries is the lack of a steam generator - quite expensive and not convenient to operate the unit. Heating of the mash / wort is ensured by the heating of the jacket over the entire inner surface of the mash-wort kettle. Heat carrier in the heating jacket is food grade propylene glycol. Heating element - electric heating elements or gas burner. Our heating system is safe and easy to operate, and the heating design is reliable and durable. Our heating system was tried and appreciated by our customers around the world.
Production of a brewhouse with a steam jacket is possible.
Tel. +380931071000 (WhatsApp) Iryna
In our standard base kit we offer two and three-unit brewhouses.
The two-units brewhouse contains:
Mash-wort kettle;
Lauter tun;
Piping and pump(s);
Remote control for two units;
The three-units brewhouse also contains a whirlpool and a control panel for three units.
The rest of the units, such as a mash-kettle, hot and cold water tanks, we offer as additional equipment at the client's choice.
Cost of equipment:
Base equipment
Roller malt mill 150 kg/h RM-150 1 pcs.
CCT at 300 liters CCT-300 7 pcs.
Plate sanitary wort chiller for wort cooling HE-300 HE-300 1 pcs.
CIP-station for tanks up to 600 liters and beer kegs CIP60(2)K 1 pcs.
Beer Glycol Chiller for Fermentation Tanks Cooling CH-6 1 pcs.
Three-units brewhouse for 300 liters BHW-300 1 pcs.
Cost of base equipment: 45730,00 €
Additional equipment
Hot water tank at 600 liters HWT-600 1 pcs.
Cold water tank at 600 liters CWT-600 1 pcs.
Cost of additional eqiupment: 6950,00 €
Cost of complete set: 52680,00 €
Electricity consumers:
Roller malt mill – 1.5 kWt
CIP-station – 3.8 kWt
Beer Glycol Chiller – 3 kWt
Three-units brewhouse – 25 kWt
Hot water tank – 5 kWt
A feature of our breweries is the lack of a steam generator - quite expensive and not convenient to operate the unit. Heating of the mash / wort is ensured by the heating of the jacket over the entire inner surface of the mash-wort kettle. Heat carrier in the heating jacket is food grade propylene glycol. Heating element - electric heating elements or gas burner. Our heating system is safe and easy to operate, and the heating design is reliable and durable. Our heating system was tried and appreciated by our customers around the world.
Production of a brewhouse with a steam jacket is possible.
Tel. +380931071000 (WhatsApp) Iryna

Mikropivovar na výrobu 200–280 litrů piva denně
1 497 878 Kč
Three-units brewhouse for 300 liters — model: BHW-300
In our standard base kit we offer two and three-unit brewhouses.
The two-units brewhouse contains:
Mash-wort kettle;
Lauter tun;
Piping and pump(s);
Remote control for two units;
The three-units brewhouse also contains a whirlpool and a control panel for three units.
The rest of the units, such as a mash-kettle, hot and cold water tanks, we offer as additional equipment at the client's choice.
Cost of equipment:
Base equipment
Roller malt mill 150 kg/h RM-150 1 pcs.
CCT at 600 liters CCT-600 7 pcs.
Plate sanitary wort chiller for wort cooling HE-300 HE-300 1 pcs.
CIP-station for tanks up to 600 liters and beer kegs CIP60(2)K 1 pcs.
Beer Glycol Chiller for Fermentation Tanks Cooling CH-6 CH-6 1 pcs.
Three-units brewhouse for 300 liters BHW-300 1 pcs.
Cost of base equipment: 51680,00 €
Additional equipment
Hot water tank at 600 liters HWT-600 1 pcs.
Cold water tank at 600 liters CWT-600 1 pcs.
Cost of additional eqiupment: 6950,00 €
Cost of complete set: 58630,00 €
Electricity consumers:
Roller malt mill – 1.5 kWt
CIP-station – 3.8 kWt
Beer Glycol Chiller – 3 kWt
Three-units brewhouse – 25 kWt
Hot water tank – 5 kWt
A feature of our breweries is the lack of a steam generator - quite expensive and not convenient to operate the unit. Heating of the mash / wort is ensured by the heating of the jacket over the entire inner surface of the mash-wort kettle. Heat carrier in the heating jacket is food grade propylene glycol. Heating element - electric heating elements or gas burner. Our heating system is safe and easy to operate, and the heating design is reliable and durable. Our heating system was tried and appreciated by our customers around the world.
Production of a brewhouse with a steam jacket is possible.
Tel. +380931071000 (WhatsApp) Iryna
In our standard base kit we offer two and three-unit brewhouses.
The two-units brewhouse contains:
Mash-wort kettle;
Lauter tun;
Piping and pump(s);
Remote control for two units;
The three-units brewhouse also contains a whirlpool and a control panel for three units.
The rest of the units, such as a mash-kettle, hot and cold water tanks, we offer as additional equipment at the client's choice.
Cost of equipment:
Base equipment
Roller malt mill 150 kg/h RM-150 1 pcs.
CCT at 600 liters CCT-600 7 pcs.
Plate sanitary wort chiller for wort cooling HE-300 HE-300 1 pcs.
CIP-station for tanks up to 600 liters and beer kegs CIP60(2)K 1 pcs.
Beer Glycol Chiller for Fermentation Tanks Cooling CH-6 CH-6 1 pcs.
Three-units brewhouse for 300 liters BHW-300 1 pcs.
Cost of base equipment: 51680,00 €
Additional equipment
Hot water tank at 600 liters HWT-600 1 pcs.
Cold water tank at 600 liters CWT-600 1 pcs.
Cost of additional eqiupment: 6950,00 €
Cost of complete set: 58630,00 €
Electricity consumers:
Roller malt mill – 1.5 kWt
CIP-station – 3.8 kWt
Beer Glycol Chiller – 3 kWt
Three-units brewhouse – 25 kWt
Hot water tank – 5 kWt
A feature of our breweries is the lack of a steam generator - quite expensive and not convenient to operate the unit. Heating of the mash / wort is ensured by the heating of the jacket over the entire inner surface of the mash-wort kettle. Heat carrier in the heating jacket is food grade propylene glycol. Heating element - electric heating elements or gas burner. Our heating system is safe and easy to operate, and the heating design is reliable and durable. Our heating system was tried and appreciated by our customers around the world.
Production of a brewhouse with a steam jacket is possible.
Tel. +380931071000 (WhatsApp) Iryna
X